Creating centerline\ROW in ORD from graphics created in InRoads Power Survey SS2

I'm going to use graphics created with InRoads Power Survey SS2 to import into a file created with ORD 2020 R3 U9. Then follow the steps used in the centerline creation and R/W creation from the LEARN ROW fundamentals videos. I assume this should work.

The other item I was asked to do was generate a report for the alignment as is usually done in INR_PS SS2 (by the other office; I haven't don't an alignment; this is my first). I don't see any example of this in ORD that I can see. Suggestions?

Thanks!

Parents Reply
  • Once the ALG has been imported into the ORD file as an alignment, the alignment is saved as part of the ORD file.

    SS2 required separate non-graphic data files to store civil information. ORD actually can store all of the rules and definitions as part of the graphics, so we no longer need data files. You have the option to import and export data files, but those are only for communicating information outside of ORD. If everything is being designed in ORD from here on out, you can probably archive off the ALG after its been imported.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Children