Hi, there?
I encountered a strange thing:
when I finished cross section production, just only one sheed model is created, the others is not created.
But in the processing, I can sheet models and drawing models are creating?
where are the sheet models?
thanks in advance!!!
ORD 10.09 edition
It looks as if you are not looking at the Models dialog, but the View Set dialog.
If you open the actual Models dialog, are your sheet models visible there?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Joe, I have seen similar behavior to this for clients when they attempt to include the sheets in a Sheet Index which they do not have access to write to (typically in ProjectWise). Did you have the drawing creation set to add to the Index? If so, does it create the sheets if you don't add them?
Steve
www.envisioncad.com
ORD - 10.12.02.04 / 10.10.21.04 / 10.10.01.03 / 10.08.01.33Power GEOPAK / Power InRoads - 08.11.09.918Civil 3D - 2021 / 2022
Hi, Steven,indeed I have the drawing creation set to the sheet index and even if I don't add them they can create the sheets but cannot display the sheet number.
I found the reason. because annotation definition created by myself is not suitable and when I delete the annotation definition everything is OK!
Answer Verified By: Joe