OpenRoads Designer, AutoTurn and Vehicle Tracking

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Mark Shamoun — Thu, 26 May 2022 12:49:39 GMT

Hi Kurt,

Do a ribbon search for "Customize Ribbon" and it will bring up a dialog you can use to move things around and change the ribbon.

There is some good info here:

Customizing Ribbons and Tool Bars - MicroStation Wiki - MicroStation - Bentley Communities

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Kurt Cox — Wed, 25 May 2022 23:35:43 GMT

Hi Mark Shamoun,

Would you be able to point me in the direction of some instructions on how to customize the ribbon to get the AutoTURN tab to show up? I checked in each of the variable sections (MS_MDL, MS_CMDTABLE_LOAD, MS_GUIDGNLIBLIST) and I do see that AutoTURN shows up in each of those respectively however I cannot find it under any workflow. I did right-click and went to customize ribbon and see that there is an AutoTURN tab that is supposed to load but it's not. I also see several other AutoTURN and AutoTURN Pro tabs as well so I'm not sure if I'm selecting the correct one. I appreciate you taking the time to respond and any help is greatly appreciated.

Regards,

Kurt

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Kurt Cox — Tue, 24 May 2022 15:31:00 GMT

Hi Mark,

That makes sense, I appreciate you getting back to me so quickly.

Regards,

Kurt

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Mark Shamoun — Tue, 24 May 2022 03:11:19 GMT

Hi Kurt,

You will only see it is the "Drawings" Ribbon Workflow by default in ORD. You can Customize your ribbon to get the Autoturn tab in the "OpenRoads Designer" Workflow if you need it to be conveniently located.

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Kurt Cox — Mon, 23 May 2022 21:48:55 GMT

Hi Mark Shamoun, I'm trying to integrate AutoTURN 11 with ORD 2021 Release 2 but having issues with the ribbon not showing up. I've tried other steps that you have put down as answers on other threads (Launching Autoturn in Connect - MicroStation Forum - MicroStation - Bentley Communities) but still no luck. I see that you help others quite frequently, any help is greatly appreciated.

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

Mark Shamoun — Wed, 08 Dec 2021 09:00:13 GMT

yep. AutoTurn 11 works great with the latest versions of ORD (and Microstation platform products) and even can link the turnpaths to alignment geometry so it will dynamically update on geometric changes of the alignment. Autodesk Vehicle Tracking stopped supporting Bentley Microstation platform products as of 2017.

RE: OpenRoads Designer, AutoTurn and Vehicle Tracking

JeremieDL — Wed, 08 Dec 2021 02:07:27 GMT

Autoturn is compatible, Vehicule tracking will never be.