I'm getting an error "Fence contents overlap" while trying to export the file to .dwg. I could not find any fence elements in the model. Below are some screengrab for the same. What could be the problem? It is taking correct seed file while export.
Thanks in advance.
May I request you to please refer to the below video & do the needful ?
Here is the another video for exporting dgn to dwg file in OpenRoads Designer including the settings as shown in the snapshot which is shared by you.
I followed the steps shown in the video's links but it is not working. Any other suggestions.
Senior Highway Design
ZUTARI SOUTH AFRICA & AURECON
I believe that message is simply reporting that your current fence settings are set to Overlap, as opposed to inside, void, clip, etc. If you key in NULL, it should clear the message fields. Then, you could try again, but there must be some reason it fails, but it is not related to that message.
Check the file path and see is the file already exists. Try having it use a simple path like C:\Export to see if the path name is too long.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
We have found that a visible Terrain in one of the models usually causes this issue - havent been able to demonstrate it to put a ticket in though, but its been an issue for years.
OpenRoads Designer 2022 R1 (10.11) | Microstation CE Update 17.1 | ProjectWise CE 3.4
Thanks Mark and Chares, we enabled Bing maps with a very large terrain model. In the process of testing the following workflow to convert the entire file to a V8i version of dgn and then export that file to dwg. Sure some functionality will go astray but at least we have something in dwg format.