Using 2021 R2
I have been creating new Sheet dgnlibs to deal with certain issues we are facing. When I create the Plan and/or Profiles, the Sheet Annotation is coming in a fraction of the size it should. I am using a 1"=40' scale.
The Plan and Profile borders are coming in at 100' length, for a 1200' plan/profile.
Any thoughts/suggestions? Happy to share the files.
Probably a silly question, but are all of your files using the same working unit definitions and unit resolutions?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Yes.
I had to generate all new files as we are utilizing International Feet instead of Survey Feet...
I am guessing it is some setting like that, but I am at a loss at the moment...
Hi Dan - did you ever figure this out? I'm having some issues with Profiles coming in wonky too and I'm guessing you've mastered this by now
I did solve this... It has been too long and I don't remember the solution to the issue I was having.
Since this was so early in the development, it was probably a scale thing (as discussed below)
If you post the file, I can take a look.
-Dan
There is another part of the setting in the CONNECT Platform. All files need to be 10000 units per foot, "Until we added this extra decimal of precision, there were many similar issues.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
Thanks Dan - I actually got it all figured it out. My organization is still using the 1:1 scale for annotation which is creating certain challenges!
Glad you sorted it out. I have had similar issues on my end. I have had to go through and set everything up from scratch to use appropriate Annotation Scale, Text Styles, etc.
It has been quite the challenge for sure.