Hi
For a longer time I've been struggling with stacking cross-sections on sheets. Basically only a single sheet is created with a single cross section displayed. However all other references are attached.
The X/Y of reference attachment origin is set to: -nan(ind). I am using no Coordinate Systems in the master model for cross sections, however there is one set in the model with Centerline, corridor and terrain.
This happens most of the times I am trying to create sheets. Drawing models are just fine.
What may be the reason for this?
Hi Adam, did you figured it out? I am having the same problem when using a custom group annotation.
Rogério Oliveira
Microstation Connect | OpenRoads Designer | OpenBridge Designer
hi, what I have noticed after reading your post, I am using my own annotation groups also when this happens. Testing this with Bentley delivered annotation group. However I am not sure how custom annotation group may impact stacking cross sections on sheets. will let you know here with my outcome. Also, I logged Service Request.
Best,
Adam
OpenRoads Designer 2022 (10.12) | OpenRail Designer 2022 (10.12)
Hi Adam, if I use Bentley delivered annotation group the stacking cross sections on sheets works fine. It must be something with the custom annotation group, some variable that is not define and causes ORD to use the "-nan" (not a number, I believe) value.
I am on the same track, Bentley Support is trying to narrow the issue. I will let know here with our findings. For now I use delivered configuration to cut sections and arrange it to sheets and then use my annotation groups for annotating.