I'm still working in SS10 and recently added the Civil configuration variables to a client's configuration. I create a 2D design file for a corridor, then attach a Civil terrain file (created in a 3D seed file) and an Civil alignment file (2D seed file with 3D model created when profiles added). After I create a corridor, multiple instances (eventually 20+) of the alignment dgn file get spontaneously attached to the 3D model within the corridor file. I have never seen this before. Is there a variable that causes files to automatically be attached? Any ideas what might be causing this? (Power GEOPAK SS10 version 08.11.09.918)
I did find this:https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/178240/3d-model-references-duplicating/516955#516955
And this: https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/109145/ss4-geopak---additional-references-attaching-automatically-when-civil-linework-is-manupulated/417068#417068
I suspect that you need to detach the terrain from the 2D design model and attach it to the 3D design model.
Since you are using Geopak, it never hurts to delete your Geopak RSC files: https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15923/geopak-resource-files---how-to-remove-them-and-why
And it may not hurt to file a SR with Bentley Support. This isn't a brand new issue, and they probably have notes on it (somewhere) for how to fix it.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
I have seen that...I can't remember what it was or if there was a fix. I'll have to search here to see if I can dig it up.
You're welcome to search here as well. The more eyes looking, the better the chance of finding.