How can I get my stationing to read whole numbers? No matter what I change in the settings, I get two decimal places.
Example; We want 100+50, not 100+50.13.
Brian,
Have you tried changing the precision setting from two decimals to none?
Where do I find that window?
File Backstage > Settings > File Settings > Design File Settings
Awesome, thanks! We're almost there. We need offset to whole numbers also but even though I set the offset to "0", I still get two decimal places.
That one will most likely be in the working units category. Careful with this one as it may change more content than what you want it to.
I did try that earlier but it didn't change anything. Let me know if you have any other ideas.
Thank you!
What version of ORD are you on?
10.09.00.91
If it's a text favorite then check the settings for the text favorite as the text favorite could have a manual override on it for accuracy.
Well, I found what you said, but I can't edit it.
Correct! That's due to the fact that this setting exists in the dgnlib file. I would be very cautious when editing this setting in the dgnlib. You will want to check with your cad manager before doing so as it will not only change on your end but everyone else in your agency as well. I can't think of another quick workaround here besides manually removing the decimal and any content behind it.