Anyone having issues with levels not sticking after you turn them on/off and save settings? I am trying to print plans and every time i go into the sheets the topo reverts along with any other layers i have turned off/on.
We had this issue a while back. Toggle "save settings on exit" off in your user preferences.
Hi Mary,
If the link is broken because of shutting off a level in the sheet, is there any way to re-link it? I remember this happening back in the early 2000s when I first started using a container file to control levels. Back then, there were no options to switch from "never", "allow", or "always"). All you could do back then was detach and re-attach and then it would be re-linked. I used to do a model lock on the sheet to keep people from messing up my sheets. Once they came out with the 3 options, I never had that trouble again - until this software came out.
I had the same one and I still can't fix it
Thanks Tim Hickman
Jake Mitchell Senior Engineer jake.mitchell@loweengineers.com LOWE ENGINEERS Office 678.742.5506 Cell 404.861.6872 990 Hammond Drive, Suite 900 Atlanta, GA 30328 loweengineers.com
I just got in on this conversation, because I was having the same issues. I started looking around for answers. What worked for me is to double click the reference file and set Synchronize View to (none)