Shifting/Adjusting Plan View Named Boundaries

Question

ORD Version 10.10.01.03 (2021 R1) 
 We keep running into issues when it comes to adjusting a previously placed named boundary to cover additional area after it has been placed and sheets cut. When we adjust the boundary, all of the text that has been placed in the drawing model shifts. It seems to be because the named boundary in the drawing model itself shifts. Is there a way to prevent this from occurring or otherwise mitigate this issue?? 
 
 Thanks! 
 Ben

Matthew Whitley · Accepted Answer

It's not the text that moves. It's the reference to the design. Open reference manager in the drawing tabs. Check a tab where the named boundary wasn't adjusted. In my experience the "X" and "Y" offset will both be "0". Now open a tab when the boundary was adjusted. The "X" and "Y" offsets in these drawing tabs will be not be zero. Change these offsets back to "0" and the design reference will move back into alignment with the text. 
 
 Hope this helps.

Shifting/Adjusting Plan View Named Boundaries

Top Replies