Shifting/Adjusting Cross Section Named Boundaries to a Different Station

ORD 10.10.01.03 (2021 R1)

Hello,

I need to move a very specifically placed cross section named boundary from one station to another. Is there a way to reposition the named boundary back to a specific station and keep the same boundary width/height? I've found some videos on adjusting the offsets LT/RT at one station, but not changing the station of the named boundary entirely. 

Thanks!

Ben

Parents
  • Hi Benjamin,

    I don't think you can reposition existing cross section named boundary from one station to another. However, you can add a new named boundary to your specific station and have it contained within the same named boundary group. Just make sure you set all dimensions same as the original named boundary during it's creation.

    Regards,

    Mariusz

    Regards,

    Mariusz


    OpenRoads Designer 2022 R1

    Answer Verified By: jpln 

Reply
  • Hi Benjamin,

    I don't think you can reposition existing cross section named boundary from one station to another. However, you can add a new named boundary to your specific station and have it contained within the same named boundary group. Just make sure you set all dimensions same as the original named boundary during it's creation.

    Regards,

    Mariusz

    Regards,

    Mariusz


    OpenRoads Designer 2022 R1

    Answer Verified By: jpln 

Children