https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/232074/annotate-model-in-the-profile-drawing-model-is-only-annotating-a-small-part-of-the-profile-cut-sectionI&#39;m sure there&#39;s probably a simple mistake, somewhere, but I&#39;ve checked everything I can think to check and have come up empty-handed on this one. In short, I&#39;m trying to annotate a couple new profile models, but instead of getting a profile grid withen-USTelligent Community 12https://communities.bentley.com/thread/720001?ContentTypeID=1Tue, 05 Jul 2022 22:38:19 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:70a23174-0496-4b37-a7a6-c6eebf11c9deNicholas Ericson<p>That seems to have been the issue!&nbsp;</p> <p>Apparently the DOT&#39;s Org-Civil files I had updated to had changed the working resolution for their Drawing/Sheet seeds, and so I could no longer cut sheets correctly, since the design model&nbsp;was at 1,000 resolution per distance unit (the old settings) and the new seeds were at 10,000 resolution per distance unit.&nbsp; I made a workaround by making copies of the drawing/sheet seeds and changing their working units/resolutions to match the old standard.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/719969?ContentTypeID=1Tue, 05 Jul 2022 16:36:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:62490a32-134b-4b8a-b755-1f374c7a761fjpln<p>My feeling is that it is due to some intial setting in the file and especially something with working units.</p> <p>If I create a new file based on Imperial Units and reference DTM and design, then copy or import alignment, then I can get annotation correctly done.</p><div style="clear:both;"></div>