ROW not showing correctly in Dynamic Cross Section View

RE: ROW not showing correctly in Dynamic Cross Section View

Aaron Adviento — Mon, 12 Dec 2022 17:41:47 GMT

Mark, thanks for the reply. I may have to double check my workspace to make sure there is a cell assigned to the R/W feature definition.

RE: ROW not showing correctly in Dynamic Cross Section View

Mark Plum — Mon, 12 Dec 2022 17:35:56 GMT

Aaron:

Do you have an object- a cell probably- assigned to be used in the dynamic cross section area of this linear feature? The "dot" you have mentioned is probably just a placeholder here, but it could be a cell. If you zoom as far in as you can into this area, is it still just a "dot"?

Mark

RE: ROW not showing correctly in Dynamic Cross Section View

Aaron Adviento — Mon, 12 Dec 2022 17:19:07 GMT

Was this issue ever resolved? I am having a similar issue but my R/W line does not show correctly on the dynamic sections (it is just a dot but it is coming in at the correct elevation). The profile for the R/W is based off the active terrain and I set the profile to active.

RE: ROW not showing correctly in Dynamic Cross Section View

caddcop — Fri, 12 Aug 2022 01:12:57 GMT

Are any 2D files attached to the 3D models? I've seen similar results when someone has done that.

RE: ROW not showing correctly in Dynamic Cross Section View

Mark Plum — Wed, 10 Aug 2022 04:45:43 GMT

Eddie is more than likely correct.

Mark

RE: ROW not showing correctly in Dynamic Cross Section View

eddiegiese — Wed, 10 Aug 2022 03:12:20 GMT

Is the profile set to active?