Labeling Pipes Using Civil Modelerhttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/234250/labeling-pipes-using-civil-modelerI want to use Civil Modeler to label (or annotate) pipes that have been placed using Open Roads Drainage and Utilities. When the pipe is long enough, I want to the label to run tangent to the pipe a set distance above the pipe. If the pipe is shorteren-USTelligent Community 12RE: Labeling Pipes Using Civil Modelerhttps://communities.bentley.com/thread/727349?ContentTypeID=1Fri, 19 Aug 2022 13:47:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f3e20266-4226-4453-b01c-d52e83a75f31Karl Dauber<p>Hi Bill,</p> <p>I assume you are referring to the Civil Labeler tool?&nbsp; I would set up two different labels: one for placing parallel labels and another for labels using leaders.&nbsp; Alternatively, you can alter the placement method on the fly.&nbsp; Personal preference.</p><div style="clear:both;"></div>