Difference annotation Active Profile - Active Surface

RE: Difference annotation Active Profile - Active Surface

Holly Herring — Mon, 29 Aug 2022 12:42:08 GMT

You can create a Civil Label to annotate a point to do this manually. You'll need to create a Text Favorite for the point that references the Delta between the point/surface elevation. Then use that Text Favorite to build your Civil Label. I recommend copying one of our delivered labels and modifying it to your needs. https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/57309/video-introduction-to-civil-labeler

RE: Difference annotation Active Profile - Active Surface

Gunther Groenestein — Mon, 29 Aug 2022 11:12:33 GMT

Does it also work for annotation at geometry points of alignments:

It is easy to calculate the difference between MV (existing surface) and TOP (Active profile), but the client likes to see the coverage directly. And it is a good verification of the design.

RE: Difference annotation Active Profile - Active Surface

Youssef Boutlane — Mon, 29 Aug 2022 09:52:29 GMT

Hello,

I usually use a Frame Annotation in my annotation group for profile drawings to get the difference between the active profile and active surface.

You can take a look at the attached annotation group to have a better idea.

communities.bentley.com/.../Elevation-Diff.zip

Regards,