Good afternoon,
I've placed a template point for guiderail in my roadway template, and set the feature definition of the template point to what I believe to be the correct feature: Linear/Template Points/Guardrail and Barrier/TL_Guardrail_Single_Sided_R.
In the Dynamic Sections view, the guiderail appears. However, in the 3D model, only a line along my hinge point appears in the model, corresponding to where that template point is. The 3D guiderail does not show up.
Attached are screenshots of the library feature definition and feature symbology properties for the guardrail point. I think it all looks correct?
Any help would be much appreciated!
Thank you,
Larry
Try setting "create template geometry" to true.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Thank you for the response, Marcus. Unfortunately, I am unable to change that setting from false to true, it doesn't let me edit it. Is there a different place where I can edit that?
**afterwards you might need to reprocess the corridor
Hmm, so when I went into those settings, the linear feature display setting was already set to true.
Just in case: is Line Styles ON in view attributes ?
Yes, I checked and Line Styles is on in the view attributes.
If create horizontal geometry then assign an active profile to it with the same guardrail feature definition does the linestyle appear in the 3D model?
As a test you might also change the feature definition on the template point to something else to see if the corridor 3D feature updates. If it does change, then modify the feature definition on the template point back to guardrail.
I'd also check that all your levels are on in the 3D model.
I tried that, and it just shows up as a solid line, just like it's currently doing in my 3d model based off my template. FYI see below, attached is how it appears in the model. Just a line showing up corresponding to the guide rail point in my template. I checked and all levels are on.