Hi there.I have problems to place my Civil Cell into the modelfil. When I use "Place Civil Cell" and choose my own Civil Cel, which I created, it is not coming out in the end. It is not coming any error-warning either.Do you know, what it kan be??
Did you choose reference line for civil cell?
Can you send picture the process of placing civil cell?
----------------------------
Tuan
OpenRoads Designer CE - 2021 Release 2
(Version 10.10.21.04)
Thanks for your answer. I think, I did. My opinion, the error is in the Civil Cell itself. I have made print screen of monitor. Maybe you will be able to find my mistake.the best regards
Hi Yevgen Gonchacrenko
I think I found your error.
The most important thing in making civil cell that is using "offset line" + "persist snap".
Even you did offset line in civil cell, but imagining that software cannot understand the location to make offset line from reference line in stage of placing civil cell, if you didn't offset with "persists snap".
In your civil cell, I saw that you did not create the two important offset lines with "persists snap" picture below, as well as persist snap for the offset line of center line.
So, solution for this issue that are:
1. Create offset line for center line with "persists snap" at intersection of two reference lines.
2. Create offset line "1" with "persists snap" at intersection of two reference lines.
3. Create offset line "2" with "persists snap" at intersection of two reference lines.
4. Make curve for offset lines.
Hi Parker.Thanks for your help. I will try to fix my error. If I will not be able to solve the error, I will write you again. have a nice weekend
Hey againI have this problem still. I have created "Civil Cell" without templates (Linear and Surface templates) and I have gotten a success with placement "Civil Cell" into the modelfil. (You can see that below in the picture). But when i create "Civil Cell" with templates, it is not coming out in the end. I think, maybe it's something wrong with templates!????? what do you think about that?
It is difficult to know where the template goes wrong according to the little information you provided.
In this case, I suggest you watching this useful video and learn how to make it in correct way.
I found this video on OpenRoad Wiki Web
Video: Create Driveway Civil Cell