RE: Terminator weight not showing in OpenRoads Designer (FDOT Connect 10.10)

Jesse Finch — Wed, 31 Aug 2022 03:42:19 GMT

In both cases the "Place Note" tool was used.

My understanding was the Civil Labeler was for alignment or profile-based labels since they are focused on pulling station/offset/elevations. For user-populated text (such as curb construction or pavement markings) we use the "Place Note" tool. Also, I believe the Civil Labeler uses the same dimension styles that we would use for Notes, so it would still have the same arrowhead.

I will have to look into using the Civil Labeler tool regardless though, as it seems to have a lot of control over settings.

RE: Terminator weight not showing in OpenRoads Designer (FDOT Connect 10.10)

Mark Plum — Wed, 31 Aug 2022 03:35:54 GMT

Jesse:

Are you using the legacy FDOT dimensioning tools or are you using the Civil Labeler? I assume the legacy tools as such is more applicable to what you are dimensioning. However, I would take a look at the Civil Labeler dimension styles which are being pulled by that tool. It is entirely possible that FDOT has changed a few things for their latest Workspace. I actually like the smaller arrowheads!

Best Regards,

Mark