FDOT Connect/ORD User here. I am trying to do plan over plan sheets, and on of my aerial raster references is printing at the set transparency, and the other is not. It appears as it should in CADD, but not in PDF. Any ideas why or how to fix??? Thanks!
Matt - try turning off any 3d levels (DTM_* and Default tend to be the worst offenders) that you have referenced and try again. Often this is in the SURVRD. You're getting the tiling of the raster on the lower plan clip that we see with this.
Eddie Giese, PEProduction Manager | Senior Roadway EngineerLicensed in FL & PAACEC FDOTConnect Instructor on behalf of FDOT
Patel, Greene & Associates, LLC PowerGEOPAK V8i SS10 (08.11.09.918)OpenRoads Designer 2021 R2 (10.10.21.4)OpenRoads Designer 2020 R3 (10.9.0.91)ProjectWise Explorer CE 10.0.3.453LumenRT CE Update 14 (16.14.60.98)
Eddie, are we talking in the default, drawing, or sheet model?
Start at the Default and make sure it's carried through to the Drawing and Sheet Models.
Just found something in the settings when printing individual sheets. I checked the box that says "Rasterized." It seems to work this way but I am not sure where to find this setting in the print organizer.