Hi,
I'm cutting plan sheets for my firm. We have as Sheet Seed setup with a title block and the Drawing Boundary so it knows where to place the Named Boundaries during sheet creation.
Something I noticed is that when I make the sheets is that certain sheets have Named Boundaries that are smaller than the named boundary in the Sheet Seed. For example, the Sheet Seed might have a Drawing Boundary that's 500' long, but sometimes we need 300' long or 400' long Named Boundaries to fit between certain streets better. When making the sheets, the referenced Named Boundary always comes in justified on the left side of the Drawing Boundary in the sheet model, when I'd rather have it justified in the middle of the Drawing Boundary.
How do I make it to where it centers the named boundary in the middle of the Drawing Boundary?
I am not sure how to make it automatically justify to the center of the sheet. You may already be aware of this, but you can move the drawing boundary reference in the sheet model to center it manually on the sheet.
I do know that. We just have about 105+ sheets and working through projectwise, so hoping there might be a solution that isn't manual somehow.