Reference files do not appear in OPR

Question

I'm using Open Roads Connect version 10.08.01.33 and I can attach reference files but they do not appear on my drawing. They are listed in the Reference File Manager and the display button is on. Thanks

Purva Lakde · Answer

Hello Kent, 
 I would like to mention sometimes this issue might occur is due to a 2D Model is attached to a 3D Sheet Model. Can you please check Z value which is assigned to the reference as if this Z value is too large, the reference may not display ? 
 This could also occur when attaching a 2D Model to a 3D Design Model. 
 You can also try the following: 
 1.Create a new 2D Sheet Model 
 2.Attach the reference to the new 2D Sheet Model and Fit the View. 
 You can also check this Z value as shown in the attached snapshot. If this Z value is large, change it to a smaller value or Zero and Fit View. 
 
 If still issue is persisting then I would suggest you to please first upgrade all your reference files to a version of OpenRoads Designer which you are currently working and then after attached as a references. 
 https://communities.bentley.com/products/microstation/w/microstation__wiki/10731/reference-not-displayed 
 Regards, 
 Purva Lakde