Profile by slope/vertical offset

RE: Profile by slope/vertical offset

Mark Shamoun — Thu, 17 Aug 2023 13:01:50 GMT

Hi Euan, this sounds like a different issue. I'm not sure if ive experienced this before, do you have an example?

RE: Profile by slope/vertical offset

Euan Murray — Thu, 17 Aug 2023 10:09:20 GMT

I'm on 2021 R2 (what the project was done in) and there's still an issue with profile elements not extending their full defined length when projected from an alignment, so that first and last points have no levels; or where a linear profile from element (say from +7% to -2% up to Ch 50) then a constant profile from element (-2% from Ch 50 onward) don't meet, either horizontally or vertically.

Has this been resolved in later versions?

RE: Profile by slope/vertical offset

Ken Bagnall — Mon, 24 Oct 2022 10:22:52 GMT

Installed 2022 release 1 and initial results confirm it was an issue with the version I was using.

RE: Profile by slope/vertical offset

Mark Shamoun — Fri, 14 Oct 2022 12:04:51 GMT

ok i bet you are having this issue here:

Jagged profile on new geometry element when using "Profile by Slope from Element” and other projection tools - OpenRoads | OpenSite Forum - OpenRoads | OpenSite - Bentley Communities

You will either need to request the priority build of this version or upgrade to 2021 R2 or newer unfortunately...

RE: Profile by slope/vertical offset

Ken Bagnall — Fri, 14 Oct 2022 11:09:47 GMT

2021 Release 1 - update 10 - Version 10.10.01.03.

RE: Profile by slope/vertical offset

Mark Shamoun — Fri, 14 Oct 2022 10:51:11 GMT

Hi Ken,

What version are you using?