OPEN ROADS

So I was able to change the design stage eventually, but the corridor is not updating, even when I change the template drop it does not update.

I am opening the file from my desk top. The only point controls are the supers, there is a super for the left and right side of the road.

I believe the rules are activated? Not sure if there is a true or false statement that is not letting it update?

How long is your corridor?

Jeremie it is 7.7 miles long, I was hoping to be able to change the design stage before I break the corridor into smaller segments.

That could be your problem. It is recommended to only run corridors of approximately 1 mile or so. Since ORD can utilize referenced corridors, there's not much drawback to breaking the thing up from the beginning. There is, as you've noticed a significant drawback to maintaining a very long corridor.

I'm not even certain you CAN break up a corridor once it's created. I see that sort of question posted often, but I don't recall that there is any good solution to it.

That could be your problem. It is recommended to only run corridors of approximately 1 mile or so. Since ORD can utilize referenced corridors, there's not much drawback to breaking the thing up from the beginning. There is, as you've noticed a significant drawback to maintaining a very long corridor.

I'm not even certain you CAN break up a corridor once it's created. I see that sort of question posted often, but I don't recall that there is any good solution to it.