I am working in MicroStation Power GEOPAK V8i. I have a terrain file, existing ground, corridors, etc. all working no problem. I am attempting to model in a detention pond for a storm sewer design. The current iteration for the "pond" will be a detention ditch along an existing ditch channel. I have modeled a fairly standard V-Ditch, with a 1' bottom, 2:1 slopes with the ditch being 3' in depth.
I have modeled ditch in the following method: Horizontal Line Between Points (for alignment) > Profile View > Profile Line Between Points > "Set Active Profile" > Offset ditch bottom 1' > Project Profile to Element (so each side of the 1' ditch bottom have the same profile) > Profile By Vertical Offset From Element (offsetting for ditch top) > Create Terrain Model From Elements.
I now have a successfully modeled ditch -->
THE PROBLEM:
When i try to "Analyze Pond" to determine the capacity, so i know whether or not i need to make it larger, etc. The command doesnt seem to work? I run the "Analyze Pond" command, select my Terrain Model and it shows the capacity line in Pink/Purple, which would be the top elevation of water, the next command it wants is "Locate Pond" i believe? If my cursor is within the pond it shows a small dialog box with all 0's. No volume, No Depth, No Elevation, No Area, and asks me to "Data Point To Save Pond" ... But when i do that, the Pink line disappears and it acts like it completed the command. And nothing is shown.