https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/239204/cross-section-annotation-grid-printing-over-lineworkI am in the model view of my cross section and the problem is that the grid is layered on top the pavement and utility linework and is printing so. I&#39;ve tried changing the grid lines to a priority of -500. I&#39;ve also changed the priority of the linesen-USTelligent Community 12https://communities.bentley.com/thread/744917?ContentTypeID=1Tue, 06 Dec 2022 22:07:08 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:793eca0c-3042-4587-b430-18d407a11dbbMaryB<p>From your cross section drawing model, open the Reference Dialog. In the dialog menu, under Properties, select Update Sequence. Change the sequence so that &quot;Active Design File&quot; is at the very top of the list.</p> <p>Update sequence starts at the top of the list, to display the first file, then display then second file, and so on down the list. The last file in the list is displayed &quot;on top&quot;.</p><div style="clear:both;"></div>