https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/239324/sheets-with-linestylesWhen creating sheets the linestyles do not appear correct. See Before Aerial pic. After I make the adjustment in the After Aerial pic all is fine. Any idea if there is a setting to fix this? A few sheets it&#39;s not too bad but many gets old, sort of killsen-USTelligent Community 12https://communities.bentley.com/thread/745370?ContentTypeID=1Fri, 09 Dec 2022 04:27:47 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8e45ec7c-0808-42f4-8169-9934ea40d7aacaddcop<p>Check the Model Properties as well. There is a setting for line style scale. This should be the same for all files and models - use annotation scale.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/745345?ContentTypeID=1Thu, 08 Dec 2022 22:51:45 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:59612816-0a7c-41ce-b72e-224c6d3501b2Paul Cusack<p>Reference attachment settings are defined in the drawing seed dgnlib that is selected in the place named boundary tool. If the dgnlib is corrected then the next time the place named boundary tool is used to create sheets it should use those new settings.</p><div style="clear:both;"></div>