Hello,
I want to show 20m offset ground and Level in Longitudinal section while exporting. In attached screen shot you can see line of 20 m offset line is generated but level is not displayed. With the default seed it show only design line and Level, OGL line and level of below ground but not 20m offset.
Kindly guide/provide video link to create new seed file to add 20m offset OGL level (LHS and RHS)
Regards
Hi
To show OGL Levels for offset Alignment in the Profile Drawing of a Base Alignment.
1. Create offset Alignments (10m, -10m)
2. Assign surface profile to the offset alignments and assign active profile.
3 Use project profile to element (from offset alignments to Base Alignment) , in this method you will be able to create profile lines of offset alignments in Base line Profile drawing.
4. Copy a Annotation Group of Profile Drawing....and try to Edit it. You need to use concept of "ALIASES" to select offset Alignment Profile while creating profile drawing. And this will add Offset Alignment Ground Level to band.
Hope you can better understand from the attached files
8032.AnnotationDefinitions.xml
hello
thank for your effort. but as I am new to open road design. I have understand that annotation group need to copy and edit, but how to do that I am not getting.
if you have video link kindly share.
once again thank you for your effort
Hope this link of youtube video may help you to get understand
www.youtube.com/watch
Babulal
Answer Verified By: M Jain
Thanks for preparing video and help me. it is working.
please help to add super elevation in LS
Dear Mr. Jain
I would request you to create a new question for " Adding Superelevation Diagarm in Profile drawing". It will help other members for future reference.
ok..