Hello,
while doing rendering in open roads. proper rendering is not showing. i have keep default rendering setting but proper rendering happening.
kindly tell me where is issue.
System configuration is i5 12th generation with 16GB RAM.
Regards
Mahavir
There are multiple settings that can affect the render but if you are using default settings then I would guess that you may just need to change the Active light settings to turn off the Flashbulb and turn on the Solar lighting.
Good evening,
As suggested turn off the Flashbulb and turn on the Solar lighting clear image but cyan film is not removed. please suggest how to remove cyan film.
thanks for reply
As suggested i have turn off Ambient and keep solar lighting on.
In atmosphere ground value zero.
now black tint is visible in atmosphere.
kindly suggest
Hello M Jain,
Have you checked the workflows I suggested in my reply ?
Open attached Basic_Render_Settings.dgn file, reference your drawing and render with indicated settings.This shall give you a base from which you may experiment settings.
Vincent RAULT [Bentley]
hello vincent,
Thank for fast reply.
Yes i had read your work flow.
i have downloaded file you have attached. I have referenced .dng but didn't get result. (kindly note in attached .dgn file corridor is not visible)
may i can't able to understand properly.
if possible please prepare video and share.
Hi M Jain,
The workflow does work, you shall select "Solar" setting for Lightning.But you may have other issues related to your views/render, since this issue did not happen in your file.
From your printscreen it's difficult to tell,
I would check that you have only one view opened to be sure it's the one you render, fit your scene in the view, You have information available here on Vue rendering basics.
i have to reference .dwg file of .dgn file