Example shown from SS2 InRoads.
How can I create a geometry from survey shots along centerline of ditch/spoil break and cut cross sections along that alignment at surveyed locations? Profile and Cross sections need to be provided as inset in plan view.
In SS2, I would create a 3d line along the profile shots and import as a horizontal and vertical alignment. I could then easily generate a profile. The surface for the cross sections was created by inserting a breakline feature (so that it could be annotated in the cross section) at each point along the cross section cut line. Cross sections were then cut and annotated in the plan view.
I cannot figure out how to accomplish this in OpenRoads. Can anyone point me toward some instruction for this?
There's a lot going on here that has changed substantially from IR SS2 to ORD. Putting your particular project aside, are you familiar with creating profiles and cross sections in ORD, annotating them the way you want, and then printing them independently?
I think you are exactly right. I am in a deep dive right now and there's a lot of fight left in me! Our client wants work delivered in ORD, but still wants .alg/dtm deliverables as well. So I am straddling the fence with this deliverable. I think it is important to figure out the ORD way. I am drowning in You Tube videos! Thanks for the kind advice. I will surely follow up on your suggestions.
My basic plan is to:
-Create Baseline Geometry for Main Cross Sections. (Can do)
-Isolate the Main Cross Section Survey points into a field book and bring into dgn. (Can do)
-Create terrain from Main Cross Section Survey points and clean up with breaklines. (got it mostly)
-Create Named boundaries at specific locations (working on - they keep coming up at "0" - I do not have a vertical gepmetry)
-Create Cross Sections and print to sheets (working on - got to get previous working to show existing terrain)
-Figure out how to get the "features" into the cross sections. (looking for info)
-Figure out the annotation (there is an annotation group in my workspace for a fence - can use this to figure out how to do the rest)
To do the ditch profiles and cross sections - use similar plan but with a 3d line imprted to geometry. Hope to "reference in" cross sections and profiles to dgn (We will see...)
Any plan line can become a feature which may show in your cross sections - you simply have to assign it a feature definition. You do this as a 2D element in a 2D drawing - vertical information is added later. And you are going to need vertical data/geometry for things to work properly. One of the easiest ways to establish that is with the Vertical Geometry -> Profile from Surface tool that generates your existing ground profile. Set that as your active profile and you have some starting geometry you can work up from.
Once you have your named boundaries functioning for your profile and your cross sections, you will be able to reference those drawing model views into your sheets however you need. I don't think you can do that automatically, but the regular reference tools work just fine.
As the other poster said, I think I know how I would do this, but to explain it would take days for me to type out. The Bentley Learn videos are helpful. This board is helpful. You can also look up videos for InRoads SS4 - they doesn't all translate exactly, but I know they were a lot of help when I was first trying to wrap my mind around modeling versus drafting-design.
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Thank you Mary. I have been tied up elsewhere, but am back at this again. I appreciate your feedback. One step at a time, right?
Thank you Steve. I got called away but am back at it again. One step at a time - I am figuring out the pieces. Thanks again...
Yep. That's how you eat an elephant - one bite at a time.There is a LOT to learn, and it's not all intuitive. Once you wrap your mind well around basic modeling concepts, a lot more will make sense, but there are still a lot of details and settings in play. And the old way of thinking about design may not work at all.