Default-3D and Default models attaching independently.

Default-3D and Default models attaching independently.https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/241749/default-3d-and-default-models-attaching-independentlyHello, ORD CE 2021 R2 Version 10.10.21.04 I've set up a file to cut a cross section at an entrance on my roadway project. When cutting the cross section I noticed the 3D graphics from the entrance (a civil cell referenced from another file) werenen-USTelligent Community 12RE: Default-3D and Default models attaching independently.https://communities.bentley.com/thread/753702?ContentTypeID=1Thu, 16 Feb 2023 13:20:30 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fd1fd37d-344f-4d48-8b54-dd26594390bfcaddcop<p>Check to see if any of the files are referenced with the Ignore Attachments when live Nesting toggled on. I experimented with making that a default for normal reference files but found it got applied to the Open Roads attachments and created a similar situation.</p><div style="clear:both;"></div>