Greetings
I am using openroads 2020 Release 2 for a project . I am creating Cut fill volumes from Civil Analysis. I have only 5-6 short corridors (100-200m long) to analyze which is in an attachment file. I have also ensured there is not any unwanted reference files with huge terrain.
I have clipped existing terrain to the extents of the corridor and removed the rules. The unsuitable material is the top 150mm of existing ground. I had applied a surface template on the clipped existing terrain for unsuitable material.
When i create cut fill volume the process is quick if I don't toggle on calculate unsuitable material. But it runs forever if I toggle it on.
Any suggestion or insight will be helpful. Thanks.
Thank you for the Response. I don't have the old terrain referenced. I just have the corridor file attached with No Nesting toggled on. The corridor file too has only the corridors and no existing terrain.
Hi,
You don't still have the old terrain reference attached or any non-displayed references with large data sets in them? I don't believe this tool honours reference (or level) display visibility so that could be causing the issue?
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.1 | ProjectWise 2023