Create Transition Not Working

Question

My corridor transitions from wider to narrower and I'm using the Create Transition tool but it does not work instead it just connects it with no transition. The templates are exactly the same except for the width but I can't make it work. 
 I've resorted to using Point Controls to manage the transition because I can't make this work. I've done transitions on Inroads Roadway designer with no problem but can't do it on ORD.

Joe Muni · Accepted Answer

ChrisMat, 
 Ok, so the solution here is that there are Horizontal constraints on the points that are supposed to be transitioning to the different width. 
 Get back into the Transition Editor (as shown in your last screen shot) and click OK. You will likely get a warning dialog box stating that in order for the transition to work properly, some constraints may need to be released. Click OK to dismiss that dialog. Then on the next screen Right-click on the point that needs to move horizontally (looks like one on each side of the centerline) and select Delete Horizontal Constraint. Use the slider at the bottom of the dialog to confirm the points now transition horizontally. 
 That should do it.

Create Transition Not Working

Top Replies