How can i remove the fill volume under a proposed bridge?
Use a Design Exception range? This used to be standard in InRoads but I am not sure if or where it is in OpenRoads.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
how can you do a design exception range? i can't find it on ORD.
Hi Victor,
Is this only in the Dymamic Cross Section View? If so im not too sure how you can control it.
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.1 | ProjectWise 2023
you can add an overlay component to the bridge deck bottom. Top of Overlay to follow component, Bottom of Overlay to follow Existing Terrain. Be sure that Overlay Componts has a feature definition with a volume option set to Design. Then with this solution the void under the bridge will be filled with "dummy" design material and no Fill will be there. Neither in dynamic cross-section nor generated with Create Cut Fill Volumes tool.
Best,
Adam
OpenRoads Designer 2022 (10.12) | OpenRail Designer 2022 (10.12)
yes, is in the dynamic cross section view, it also comes on the EW report.