Dear all,
good evening,
while doing transition of template in open road designer for 4-lane divided highway to 2-lane undivided highway, median transition form as Type1 where median transition also forms in transition template (Marked with hatch).
But i want transition form as Type2 where median is curtailed at 4-lane divided highway end and start of tranisition.
Thanks
I probably wouldn't add a transition, or else a very, very short one. I would simply start the second template drop at the beginning of your "transition", and use point controls or parametrics to control the carriageway edge tapers. You aren't really transitioning smoothly between two templates - they abut without a real transition.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Thanks for reply.
but can you please share link/video.
Parametric constraints can be defined and applied as shown in these videos:
https://www.youtube.com/watch?v=N-KjnYXvAGQ
https://www.youtube.com/watch?v=FGAuHkDJuh0
Point controls are described in these videos:
https://www.youtube.com/watch?v=YI1EjPBg4Ow
https://www.youtube.com/watch?v=clmLcH5fRWY
You can use either method in your template to control the taper of your edge of pavement in your corridor.
thanks