Hi,
Using the command "Complex Transition Between Any Element and Arc". I want to draw R=100 L=90 L=90 between an element with Line and R=15000, but it doesn't work. If R=203 it draws. How can I do that.
Hi, this looks to be strange behaviour of that tool.
Try the "Arc Between Elements tool" and you will see it will solve the criteria you have shown above. I suggest you log this issue with the Complex Transition tool in as a Service Request.
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.1 | ProjectWise 2023
Hi Mark
"The Arc Between Elements" tool only works correctly between two lines.
"Arc Between Elements" does not work correctly when drawing radius and line. It shifts Klothoid into radius.
When we draw using Inroads V8i, it gives the correct result.
Gündüz
Hi, I am not aware of this issue - can you share some information as to what the correct result should be?
Hi, using the example file in your new post, I am getting the exact same geometric result using both tools (Arc Between Elements and Complex Transition between) in ORD 2022 Release 1. Perhaps some difference since 10.10, im not sure.
I note that there were quite a few fixes to some of the Geometry tools with Spirals between ORD 2021 and 2022 releases - Defects Fixed in 2022 Release 1 (bentley.com)
Hi Mark,
Thank you for your interest
It doesn't work because I have an old version