Defining existing topsoil layer.

RE: Defining existing topsoil layer.

Gatis Gac — Wed, 10 May 2023 07:03:01 GMT

MaryB , just want to make sure if we speak about the same thing. So - I have created existing surface from topography data. Then, I create vertical aligmnet, adjust typicall cross-section and create corridor. So, what I'm interested most is that at during some of previously explained steps I define how thick (according to geological investigation) is topsoil layer, so I can define it through my road. For example, I define that topsoil is const.0.20 m thick, and I can see the actual line when roatating my design in 3D view, and also I can see the line when creating single cross-section at stationin on my choice. Is this something You ment before?

RE: Defining existing topsoil layer.

MaryB — Thu, 27 Apr 2023 14:27:02 GMT

I'm not familiar with PowerCivil - I'm used to PowerInRoads and PowerGeopak. Does it use templates? or is there another way for it to model cross sections?

If those are done with a template, you might have the ability to define a cross section "stripping" feature that follows the existing surface at a defined depth. You could possibly use a variable that you would control with a parametric constraint to define the depth from station to station. You may have to read in the Help how best to do that.

RE: Defining existing topsoil layer.

Gatis Gac — Thu, 27 Apr 2023 10:49:53 GMT

MaryB, thanks for involving!

So, for example, my road is 1 km long. Then, let's say first 200 m are with topsoil depth 0.20 m, then next 400 m with depth of 0.30 m, et.c.- it differs throughout the stationing.

I shall make a submission where designed road and existing surface is shown (existing surface shall include the topsoil's thickness). I would also love to have it in the cross-sections, of course.

PowerCivil is for Middle East V8i Version 08.11.09.789

RE: Defining existing topsoil layer.

MaryB — Tue, 25 Apr 2023 14:23:31 GMT

How is this layer defined? You say different thicknesses - how are those determined?

Do you want to create an actual topsoil surface, or would you just need it to show up on your cross sections.

You say "PowerCivil" - would you be able to give us the exact version number?