When I activate the button and click on any option, I get "unknow key-in or command" error.I am using Openroads Designer CE 2022 Release 3.
I request your help in this matter.
Then you need to file a service ticket, as suggested previously
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
The problem is still not solved.
If you need to file a Service Ticket to get help from Bentley Support, you should go to https://bentleysystems.service-now.com/csp
We are simply volunteer peer support. While there are some Bentley analysts active on the discussion boards, the Service Portal is the official means to request support.
If you noticed in the video, when I open civil accudraw, I can use the automatically selected option. I can't switch to the others. Even when I click on the automatically selected one, I get the same error message, but I can still use it.
Your first video looks like the Civil AccuDraw appears, but you never tried to use it. Yes, there is some sort of message about some unknown key-in command, but have you actually tried to USE Civil AccuDraw by defining an Origin or Reference Geometry? You whip through selecting all of the Civil AccuDraw tools, but never used any of them? Have you used them successfully before? ... from your post, I'm unclear if you know how they work since none of your video actually show you using any of them, just selecting them and indicating the lower left 'message'.