Hello All,
The problem I'm having is when applying a superelevation using assign to corridor it changes my pavement limits but shows the slope correctly. This occurs with assigning the right lane to super from the CL to the RT EOP. See screenshot. Any help is appreciated.
Thanks for the response Glenn but I figured it out. The Mode was set to "Vertical" control instead of "Both". When I changed that it put my pavement limits back to where they should be.
Curtis, It looks as though you have overlapping vertical superelevation controls at 52+70, but without seeing the points being controlled it's hard to tell. Does the corridor include left and right lanes/shoulders? Otherwise there doesn't seem to be an apparent reason for pavement width to be affected by the vertical superelevation control. Can you post the corridor .dgn file so we could look at what you have?