hello,
i have query regarding end condition as per image attached i am able to create end condition 1 and 2 but not able to create condition 3.
i have three condition for fill slope as below,
1. embankment fill slope target on terrain model with slope 50%.
2. embankment fill slope check target feature defination (Exisitng ROW) and then slope target on terrain model with slope 999%.
3. when distance between hinge point and feature defination (Exisitng ROW) is less than 2m than fill slope should target terrain model with slope 999%
i am also attached by template so kinldy make correctioncheck condition.itl
Condition 3 which you are solving first needs to begin with a DNC horizontal end condition seeking the RW for 2M. If that is successful then append another end condition that backs up to the original start point and seeks the terrain model at 999%. The appended end condition must be a child of the end condition that seeks the RW for 2M.
HTH
Patrick
Answer Verified By: M Jain
Thank for reply
I have tried same as per your reply but its not working. Template is attached which failing in all condition fall ROW seek6320.check condition.itl.
if possible kindly update my template and send me.