Fill Slope End condition

Question

hello, 
 
 i have query regarding end condition as per image attached i am able to create end condition 1 and 2 but not able to create condition 3. 
 i have three condition for fill slope as below, 
 1. embankment fill slope target on terrain model with slope 50%. 
 2. embankment fill slope check target feature defination (Exisitng ROW) and then slope target on terrain model with slope 999%. 
 3. when distance between hinge point and feature defination (Exisitng ROW) is less than 2m than fill slope should target terrain model with slope 999%

i am also attached by template so kinldy make correction check condition.itl

PEvans · Accepted Answer

Condition 3 which you are solving first needs to begin with a DNC horizontal end condition seeking the RW for 2M. If that is successful then append another end condition that backs up to the original start point and seeks the terrain model at 999%. The appended end condition must be a child of the end condition that seeks the RW for 2M. 
 
 HTH 
 Patrick

PEvans · Answer

This is how it should be 8524.check condition.itl

Fill Slope End condition

Top Replies