https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/246381/ord-21-and-22-quantities-report-by-named-boundary-causing-program-to-crash-constantlyStarted having this issue a few weeks ago when attempting to create a quantities report on ORD22. After that the problem appeared on ORD21 as well. Prior to this I had successfully created 17 quantities reports with no issues. Everything up to creatingen-USTelligent Community 12https://communities.bentley.com/thread/769250?ContentTypeID=1Mon, 12 Jun 2023 13:11:29 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2cd88516-ccac-494b-949d-c4a991065074Samuli Utunen<p>Upon further examination it seems that the model had two template drops on top of each other. Removed the other and it works without&nbsp;any trouble.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/769242?ContentTypeID=1Mon, 12 Jun 2023 11:41:30 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:07cbe5d8-c553-4a1f-aa85-cc9a8de55cb1Marc Bachand<p>I have seen crashing during this process if ORD drainage and utility models are attached to the file.&nbsp; Also, do your NB contain any arcs.&nbsp; I have seen these cause issues before as well.</p> <p></p> <p>Marc</p><div style="clear:both;"></div>