Reporting Station/Offset/Elevation of Edges of Pavement off of a centerline

Question

I am trying to generate reports of the lane lines and the edge of pavement lines off of the centerline at 25 ft intervals and not having any luck. I am using ss 10 with open roads technology.

Shawn Cooke · Accepted Answer

The mentioned reporting tool will ask for two selections (two steps). You can either select a profiled 2D graphic both times OR select your Corridor's alignment 1st then the EOP linear feature next (Tool prompt will say Locate First Offset Element). However, if you don't see 2D Linear Features being made by your corridor, check the properties of your Corridor Design Stage. If Linear Features Display option is set to False, you may not get the ability to select that 2D EOP graphic produced by your corridor. The report tool will also allow selection of the mentioned EOP graphic both times, but will start at zero and not report the stationing used by the corridor (ie. Alignment selected during the first prompt). To get a better idea how the tool works, here's a video (but not in the context of a corridor). https://www.youtube.com/watch?v=DbRVp-6vEH0

Joseph Lukovits · Answer

Don't you mean the Alignment file?..........Make sure the vertical is active?

Shawn Cooke · Answer

Station Base Report should do the trick... 
 
 Then change the report to list proposed EOP elevations.

Reporting Station/Offset/Elevation of Edges of Pavement off of a centerline

Top Replies