I want to edit the line style of traffic cones. I know I should work with the "Modify Line Style Attributes" menu in Microstation Connect. I was looking for a complete video or tutorial on this. What I want is to change the spacing of these traffic cones from for example 100' to 75'.
Hi Sina,
You can try to run 'Line Style Editor' (input Line Style Editor in the search field on left top corner). Then load your custom RSC file in the editor. Select the Stroke pattern line from the compound components of your custom linestyle. You can click on the stroke pattern between the traffic cones to be placed, then adjust the Length, like 100 to 75. Lastly save the rsc file. You will able to achieve the linestyle with traffic cone distributed in defined distance. Thanks.
Paul
Hi Paul,
Thanks so much for replying to my question. The thing is that I dont have a custom RSC file.
You can try to source the rsc which contain the linestyle of traffic cone, it may contain in your active workspace/workset standards folder. Then follow my steps to modify the pattern distance. Good luck.