https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/248455/powergeopak-reducing-cross-section-pointsHello - Microstation PowerGeopak SS10 user here - Does anyone know a way to reduce the number of points the Cross Section Generator will put into a cross section? At this particular spot, I created a terrain and used a surface template to create the componenten-USTelligent Community 12https://communities.bentley.com/thread/776259?ContentTypeID=1Thu, 03 Aug 2023 14:25:00 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:11f9f61b-9845-43f5-beed-702dc27fb031caddcop<p>I think it meshes the components and then forms triangles. So the rectangular face of the top of a component gets sliced diagonally to form the triangles. When a section cuts the triangles, any place a leg is crossed, it makes a point.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/776249?ContentTypeID=1Thu, 03 Aug 2023 13:11:40 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0b184896-cf24-421d-9dfe-e9a42045d87aMaryB<p>While I&#39;m not in that software today, there may be a way to filter annotations by a minimum segment length. While that wouldn&#39;t eliminate the extra points, it might filter them out of the automatic annotation.</p> <p>Would you be able to attach a copy of your ITL file? Someone here may be able to help figure out where those extra points are coming from, which would also take care of the problem.</p><div style="clear:both;"></div>