Profile sheets showing zero levels

RE: Profile sheets showing zero levels

Mariusz Heczko — Tue, 22 Aug 2023 07:59:56 GMT

Hi Mick,

Thanks for sharing the solution here.

However, I am a bit confused how you got the terrain displayed as shown on your 1st screenshot, if it was not made active in the geometry file. From testing in ORD 2022R1 if a terrain is attached and made active in a drawing file (where the long section drawing and sheet models are created), the terrain is not shown unless it is active in the geometry file (where the vertical alignment is created).

RE: Profile sheets showing zero levels

Mick Sheil — Tue, 22 Aug 2023 06:27:27 GMT

A colleague stumbled across the simple solution. You need to make the existing terrain active within the file where the profile was created, in my case the master geometry file. I was only making it active in the combined master profile file I was using to create my sheets.

RE: Profile sheets showing zero levels

Mick Sheil — Sun, 20 Aug 2023 00:36:40 GMT

Hi Mariusz. I am not using ProjectWise but your solution my come in handy in the near future as the company I work for is considering installing it. Thanks, Mick

RE: Profile sheets showing zero levels

Mariusz Heczko — Sat, 19 Aug 2023 16:24:57 GMT

Hi Mick,

Are you using ProjectWise? We have seen similar issues with Cut / Fill annotated as 0.000 and existing elevations annotated as 9.999. The workaround for such issue could be to open the terrain file in PW, close the file and check-in, close PW, open PW.