Power Civil: Dynamic slope tags wrong

Re: Power Civil: Dynamic slope tags wrong

MichaelGilham — Fri, 19 Jun 2009 16:19:18 GMT

Hi Neil,

you are spot on.

They are located "stationed along" the perimeter. The scenrio you proposed seems likely.

Re: Power Civil: Dynamic slope tags wrong

neilw — Fri, 19 Jun 2009 01:41:33 GMT

This seems to be happening in other locations on the object as well and perhaps on the 12th South-Opt_1 object. I changed the radii of the curb returns and I wonder if this caused the behavior since this would change the length of the perimeter of the object. Are the slope tag locations based on some sort of stationing along the perimeter or how are the locations defined in the model?

Re: Power Civil: Dynamic slope tags wrong

MichaelGilham — Fri, 19 Jun 2009 01:32:11 GMT

Hi Neil,

It appears as though both the 10:1 and 4:1 slopes that appear in View 1 are both "stuck" at a previous l(or other) ocation (even though they show where they do...) The other locations for both of these is to the right of where they appear now.

1) Find and select the 4:1 in the Object>Edit>Slopes list

2) Click Locate and locate at the position it currently appears.

3) Click "Modify Row" to update the position of that slope.

4) Repeat the same steps for the 10:1 slope.

5) Click Apply to rebuild the Object Slopes and apply the new slope locations to the Object.

That should resolve the problem.

HTHs.

Re: Power Civil: Dynamic slope tags wrong

Dan Calistrat — Fri, 19 Jun 2009 00:59:04 GMT

Same thing happens here.

MS: 08.11.05.17

GEOPAK: 08.11.05.39