Importing 0 elevation points with Z as text.

Re: Importing 0 elevation points with Z as text.

MichaelGilham — Tue, 13 Apr 2010 16:34:27 GMT

Hi,

I just explained how to do this in another thread. Here's the link.

http://communities.bentley.com/Products/Road___Site_Design/f/5922/t/52878.aspx

Re: Importing 0 elevation points with Z as text.

williera — Tue, 13 Apr 2010 07:59:23 GMT

Is there a way to do this into Powercivil? I've looked for the file>import>surface but can not find this anywhere.

Thanks

Re: Importing 0 elevation points with Z as text.

neilw — Thu, 15 Oct 2009 02:53:22 GMT

Brian L:
AutoCAD dwg that "claims to be 3D" but the elevation data doesn't match what is "written" as text. I am puzzled and stuck by this. We got the DWG from another engineering firm and that's all we got.

Likely the points were created in Land Desktop. Land Desktop allows the user to place the physical point element at elevation zero (for 2D drafting purposes) while the point's elevation data is extracted from the points database for 3D operations.

Re: Importing 0 elevation points with Z as text.

Mick Inkster — Mon, 12 Oct 2009 19:47:11 GMT

InRoads definitely can do it. You need to go to File->Import->Surface and in the graphics tab change the elevations box to read Text.

It should then bring in the points based on the X & Y and the Text as the elevation.

HTH

Mick

Re: Importing 0 elevation points with Z as text.

Bear — Mon, 12 Oct 2009 19:10:46 GMT

Not sure about InRoads, but I have seen this done in GeoPak.