It seems that either there is a bug or I miss something in superelevation tool in roadway designer. I use wizard (ig. table method), adding sections and solviing overlaps - the superelevation is defined. Then I want to revise my superelevation's section or just simply define another section for another stations. Unfortunately the list of previously defined sections is empty.
However when adding missing section again, I get message that its name is arleady takken while there is no section on the list.
Please, refere to the atached screenshots.
Thanks for any clue.
Adam
Inroads v8i (V08.11.05.47)
Hi Adam,
The wizard is used only to initially create the superelevation control lines. To edit the control lines after you have created them, you can use either the Edit Curve Set Station command (tabular) or you can edit the points and constraints in the Superelevation diagram(graphical).
The wizard was never intended to maintain information on and edit the sections, that is why you see the behavior that you have noted.
Thanks, Kevin
Thanks Kevin. I spent hours on that.
I will take it as it is, hovever it forces user to remember all names used for definition of Sections.
Adam.
Best,
OpenRoads Designer 2022 (10.12) | OpenRail Designer 2022 (10.12)