I have a simple corridor, everything works fine with my simple template (no components, just a "thin" surface).
Then I change my template, and add a component (thickness of asfalt), go to Roadway designer, and syncronises with the template from the library. Everything still works fine, and when I review my design in the roadway designer, everythins is as it should be (see attached file).
But when I create the surface, and draw a cross section set, then the component is not created for the first part of my DTM. That is, the features are there, but the component is not created. I get wrong cut/fill volumens then.
WHY does the software do so, and WHAT can be done to fix it?
A restart does not help, and the same problem occurs in other corridors as well. I don't believe this is caused by me using the software in a wrong way, I simply cannot understand what I should have been done that could cause this problem.
InRoads 8.9.2.16
Attached file explaining the problem better (screenshots): www.martin.moth-lund.dk/download/INR.pdf
I tried to create an alternate surface in the create surface dialog in the roadway designer. This surface is created as I want it, but not for the first part of my DTM. The features seems to be there all the way, but only a portion of the DTM is triangulates - the portion missing is the same part of the road, where the components are not created...
I have NO clue why, so any ideas are welcome. The project can be sent to anyones who cares to take a look
Martin,
Send me your data and I will look into it.
Denis
regarding your photo question - there is an "options" tab near the top of the message creation window (Compose, Options, Related, Preview). This is where you attach photos. If you use .PNG format rather than .JPG, then it will also show up in the body of your message.