CR - MX Colortable

Re: CR - MX Colortable

Gunther Groenestein — Thu, 11 Feb 2010 15:57:29 GMT

The same problem occurs when I use Analysis->Surface Analysis and than the level bands. The colors used in the display are totally different than the colors in the level bands key. That's annoying.

Re: CR - MX Colortable

Gaucho — Wed, 10 Feb 2010 14:23:08 GMT

I suspect the main problem has been understanding the issue. I also had a long running saga over the use of black and white. But I suspect the MX colours are heavily embedded so I would imagine that it is not an easy fix.

Mike

Re: CR - MX Colortable

Gunther Groenestein — Wed, 10 Feb 2010 12:22:11 GMT

What actions are already being done since your CR?

Re: CR - MX Colortable

Gaucho — Mon, 08 Feb 2010 12:40:55 GMT

Gunther

Agreed - what we see at present is not a logical long term solution. I'm sure I have already requested the same CR some years ago.

Mike

Re: CR - MX Colortable

Gunther Groenestein — Sun, 07 Feb 2010 01:21:37 GMT

In my opinion a color number in my Inputfile must be the same as the color number in PowerDraft/MicroStation/AutoCAD. Do I do not have to adjust any color table. Not everyone has the capability/knowledge to adjust files in the program files directory. If I adjust my colortable in PowerDraft. My drawing should change according to the new color table and not being translated through a translationtable.

With regards,

Gunther Groenestein

Re: CR - MX Colortable

inigo — Fri, 05 Feb 2010 23:03:01 GMT

For autocad, You must edit and modify the following file \Bentley\MX\MFW\Mfa\mfa_colr.dat Make some changes in the colour numbers and see how it works